Draw the change. Print the fit.
The model you downloaded almost fits. Mark what needs to change right on the 3D part, and get back an edited version that's checked to print. No CAD skills needed.
How it works
Upload or describe
Drop in an STL or 3MF, including Bambu Studio projects, or describe the part you need in words and photos.
Mark the change
Draw on the model: cut here, remove this, add a hole, make it 4 mm thicker. Add a note if it helps.
Get the edit back
AI edits the part and replies with what it changed. Keep going until it's right. Every version is saved.
Test, then print
Print checks catch problems first. Print a 1-inch test slice to check the fit before committing to the whole part.
Start from a model, or from an idea
Fix a model you have
Your shelf is thicker than the one it was designed for. The hole is in the wrong place. The bracket is 10 mm too short. Show it where, and get a version that fits your space.
Make something new
Describe what you need and how it'll be used. Ask whether it'll hold the load at that thickness, and which orientation, supports and infill to print it with.
Be one of the first to try it
The beta opens to a small group of makers first. Tell us what you print, and we'll send your invite as soon as there's room.